Centrifugal Process Pump PCF Series

CENTRIFUGAL PUMP PCF SERIES

APPLICATION

The JEC PCF centrifugal pump is suitable for handling water. Condensate, oil some aggressive chemical products and other liquids mainly used in the following application:

Water supply
Irrigation
Air conditioning
Fire fighting
Drainage
Heating
Chemical and petrochemical
Sugar and alcohol industry
Boiler feed
Auxiliary circuits in refineries
Auxiliary circuits in the industry (Paper Food Synthetic Fibers Others.)

Download PDF

DESIGN

Horizontal, single-stage, end suction centrifugal pump dimensionally built to ISO 2858 and technical specification IS-ISO 5199. The back pull out design allows for easy maintenance and repair as the rotating element may be removed without disturbing the pipework. The pump has wear rings as standard and lifting eye on bearing bracket.

DESIGNATION

Model / type - PCF
Discharge / diameter (mm) - 32
Nominal impeller diameter (mm) - 125

ACCESSORIES

DRIVE
The pump is only recommended for direct via a flexible spacer coupling. Spacer couplings enable utilization of the back pull out feature. Where belt drives are necessary a separate jack (intermediate) shaft with bearing to carry the belt loads may be

BASE PLATE
Base plates for electric drives are available in a variety of styles. Standard: fixed and grouted directly to the foundation Anti-vibration: rigid base plate on rubber mounts.

CONSTRUCTION

Horizontal single-stage, end suction with vertical discharge. The “back pull out” design allows for the maintenance of the pump without disturbing the pipework connected to the casing, or the pump alignment.The pump is built to the dimensional and technical requirements of ISO 2858 and ISO 5199. Flanges are in accordance with ANSI B16.5, 150#SORF.

CASING

Self-venting horizontal volute casing with horizontal end suction and vertical discharge.

SHAFT

The shaft is of the dry type, with a protective sleeve to prevent contact with the pumped liquid.

FLANGES

Drilling as per Ndl6 DIN 2533 (CIRF) DIN 2543 (Steel FF), Optional: Available on request.

SHAFT SEAL

The shaft sealing is carried out by means of gland packing or by mechanical seal.